JE-MA T31, T36, Fertilizer Auger

JE-MA conveying augers T 31/T 36 will turn out to be a most valuable, reliable and labor saving aid whenever there is a need for moving or shifting grain, fertilizers or granulated materials from one place to another or when fertilizer distributors or seed drills have been filled up.
In spite of their lightweight design these augers are of a conspicuous sturdiness that will endure even very hard tear and wear.
The auger tube is kept in PVC-plastic that never will give rise to any corrosion whatsoever. The plastic material provides a low weight and bearing characteristics for the auger are excellent.
The auger top and bottom are quickly released so that it is easy to detach the whole auger for cleaning. It is operated by means of an oil pump, which through oil pressure tubes is connected to the tractor hydraulic pump.
T 31 is delivered in the lengths 2.0 m, 3.0 m and 4.0 m.
T 36 is delivered in the lengths 3.0 m and 4.0 m.
The 2.0 m model is only suitable for filling drill machines with max. 4.0 m working width.
The 4.0 m model is suitable for filling drill machines with max. 4.0 m working width.
The 4.0 m model is suitable for filling drill machines with max. 6.0 m working width.
An enumeration of standard equipment for all models is contained in our price list.

Model A

The 2.0 m model is mounted vertically at the rear end of the wagon in a chain suspension.
The 3.0 and 4.0 m A models are mounted at the rear end of the wagon in a special wagon suspension. During transportation this suspension can be placed horizontally on top of the wagon.

Model B

The B models 3.0 and 4.0 m are furnished with a big inlet hopper and adjustable suspension. The angle position of the auger - as compared with the wagon - is easily altered by means of the adjustable suspension.

Model C

The 3.0 and 4.0 m C models have both a big inlet hopper and an adjustable suspension. The C models are driven by the tractor p.t.o. shaft through a transmission shaft under the wagon.

the B and C models serve as shown also for shifting the material in question from a fertilizer / lime distributor.

Model D

Model D 4.0 m is furnished with a big inlet hopper, a trolley and a big inlet hopper, a trolley and a drawbar coupling for trailing. here again the auger is applicable in connection with several types of different wagons. The auger is trailed by connecting it to a wagon or to a tractor.

 


T 23, Fertilizer Auger

Loading auger T 23 is marked in 3 different lengths: 4.0 m, 5.0 m and 6.0 m.
The 4.0 m model is delivered with fork and suspension girder bend adapted to the side of the wagon.
The 5.0 m model and 6.0 m model is delivered with an extended slide bush and a 3.7 m sliding rail for the wagon side.
In the delivery of all models is also included a hydraulic motor OMP 50, which is used for activating the augers. The hydraulic motor is driven by the tractor hydraulic pump through oil pressure tubes.
An enumeration of standard equipment for these models is found in our price list.

If wanted it is possible to employ the T31 fertilizer auger as a loading auger. In this case take off the t 31 inlet piece and install the T 23 bottom guard. The auger should then be mounted by means of the fork and the suspension girder for the wagon side. by doing so the t 31 has been altered into a T 23 auger.

All hydraulically driven JE-MA auger have as a standard a pressure filter for cleaning the hydraulic oil and for protecting the hydraulic system.


Technical dates:
Type Weight Motor type Diameter Total length
         
T 23 4.0 m 60 kg OMP 50 150 mm 4300 mm
T 23 5.0 m 78 kg OMP 50 150 mm 5300 mm
T 23 6.0m 96 kg OMP 50 150 mm 6300 mm
         
T 31 3.0 m 53 kg OMP 50 150 mm 3500 mm
T 31 4.0 m 64 kg OMP 50 150 mm 4500 mm
         
T 36 3.0 m 158 kg OMP 50 - OMP 80 200 mm 3500 mm
T 36 4.0 m 190 kg OMP 50 - OMP 80 200 mm 4500 mm